NEWS

In the present baler market, the baler equipment is constantly updated.

First of all, the operation of the warning, now many baler equipment have automatic start safety precautions warning, so that people can pay attention to the risk of the equipment, with this set of Settings can reduce the risk caused by human operation. Secondly, the automatic operation or remote control performance of the baler. We should constantly use the sensor to replace the operation of the operator, which can also improve the intelligent level of the equipment. In case of emergency, the baler equipment can automatically choose the correct measures. Finally, the full use of Internet technology and mobile 3G Internet technology, now the two kinds of technology are also constantly mature, the application has begun to become more and more widespread, only combining the two kinds of technology packaging machine can achieve a higher degree of intelligence.

Of course, there are some other areas that need continuous improvement, such as the comprehensive and effective use of energy to reduce the energy consumption of equipment, the equipment should also pay more attention to environmental protection, and the recycling of packaging materials should be strengthened. I believe that in the future, there will be more packaging materials gradually realize the recycling of packaging materials in the whole social field, which is of great significance to the environment or the conservation and utilization of resources. From the side, this will drive the development and progress of the baler industry.

How to enhance the joint bonding degree of PP packing belt?

In the actual packaging of goods, if the bonding of the packing belt joint is not strong, the bonding effect can also be improved by manual adjustment. As long as the baler lengthens the heating time or increases the friction time, it can achieve good packaging effect. If the bonding is excessive, it is necessary to take another section of the joint for bonding, and reduce the heating time and friction time, which can also achieve a good bonding effect.

PP packing belt, also often encounter this situation. In the use of automatic packing belt machine or semi-automatic packing belt machine, although the joint is bonded at the moment the goods are packed, but as long as the place of the joint will be broken as soon as it is moved. This situation is mainly caused by the following reasons:

1. The baler's perm temperature is not suitable. When the PP packing belt interface is heated and bonded, the temperature is not high, which leads to the failure to bond firmly.

2. The baler's perm skew makes the joint of the packing belt unable to be automatically aligned and cannot be completely bonded when laminating at high temperature.

3. After the packer packs the goods, the goods can be moved after the pallet is returned to the position, otherwise the firmness of the packing belt will be reduced.

4. There is too much dirt on the baler's perm, which leads to the joint of the packing belt cannot be fully fitted. Usable sandpaper burnish off besmirch, keep hot hair neat and clean.

PP packing belt is small and easy to store. And it comes in rolls, and there are a lot of different sizes on the market now. Save space, so what are the advantages of using PP packing tape?

Because of its light weight, in addition to its corrosion resistance ability, consumers will also be confused when choosing. Not easy to rust do not worry about improper storage and affect the quality and use effect, PP packing belt manufacturers said, this can reduce the footprint, easy to recycle, waterproof and moisture-proof, can reduce environmental pollution. Improve the utilization rate of resources, and finally it is a kind of environmental protection products, for its use should also pay attention to the correct operation can be. In this case, we can use in the future more convenient.

But that doesn't mean we can do whatever we want with it. So we should pay attention to the corresponding problems when we carry out this aspect. PP packing belt production of time sometimes need to printing, printing to customized printing wheel mould first, and then put lettering round on printing equipment, otherwise it is a good quality product will not have a good effect, printing wheel is spun, the production cost of printing packing belt production costs are higher than no printing packing belt, need to be aware of when printing skills or more, printing packing belt had better choose in 12 mm in width. The material, it should be how to bring PP packaging printing?

PP packing belt in the whole production process belongs to the latter part of the process, the last is embossing, will be pressed on the pattern. Is such as the packaging belt has been produced after molding and printing process, from the appearance of beautiful and generous. From the above summary, it can be seen that the main cost of the mold, the cost of the ink and the scrap rate are relatively large, increasing the friction. Inject the printer wheel into the green ink, so pay attention to the above and let the packing tape pass over the printer wheel. After stretching the packing belt through two with the pattern of the press roller, the content of the printing wheel is constantly printed on the packing belt, its role is to increase friction in use. Don't skid, engraving the required printing content on the printing wheel,

In short, so printed word packing belt is more expensive than not printed word packing belt is reasonable, we should pay attention to the above summarized problems in the production of PP packing belt. Printing is also for better use later. Relatively good grade B above pure material packing belt, every detail is decided after the better use, so that the effect of printing and brand effect is more prominent.

Packaging belt is a wide range of packaging materials, its variety, according to different classification methods, can be classified in the following aspects:

1, from the use can be divided into packaging with packaging belt and arts and crafts belt;

2, from the quality of the product can be divided into transparent A, transparent B, A, AB, B, BC and C grade;

3, from the use of the packer can be divided into manual packing belt, machine with packing belt (machine with packing belt is divided into full automaton and semi-automaton playing belt);

4, from the production of PP material can be divided into core belt and solid core belt;

5, from whether the printed word can be divided into printed word belt and not printed word belt;

6, from the ability to bear the main PP packing belt, plastic steel packing belt (also known as PET packing belt) and iron packing belt;

7. From the raw material source of the production packing belt, it can be divided into new material packing belt and recycled material packing belt;

8, from the color point of view, there are mainly white packing belt, gray packing belt and color packing belt.

Ningbo Pacific Packaging Belt Co., Ltd. specializes in packing belt unit, packing belt manufacturers,PP packing belt, welcome to inquire!

Packing belt (PP, PET) is divided into PP packing belt (also known as polypropylene packing belt) and PET packing belt (also known as plastic steel packing belt), respectively the use of polypropylene and PET polyester as raw material production, respectively suitable for the weight of different objects packaging needs.

PP packing belt: PP scientific name polypropylene, polypropylene as raw material production of a light quality environmental protection packing belt, used for automatic baler, semi-automatic baler, manual baler, etc., suitable for bundling several kilograms to hundreds of kilograms of weight carton or pallet packaging lighter objects.

Features of PP packing belt:

1, polypropylene (PP) as the main raw material, material: polypropylene wire-drawing resin, because of its good plasticity, fracture pull

Strong strength, bending fatigue resistance, small density, tensile impact performance is good, easy to use and other advantages, has been in various fields

In a wide range of roles.

2, suitable for all kinds of packing machine (semi-automatic, automatic, manual packing machine)

3. Strong adhesive force, large tensile force, light weight, corrosion resistance, beautiful appearance, high-grade

4, bright color, yellow, white and black and other colors, you can choose

5, according to customer requirements and samples, the production of printing, printing ICONS and other special packing belt.

Classification:

(1) According to the surface color of the packing belt:

Colorless transparent PP packing tape.

Translucent PP packing tape.

Opaque PP packing tape.

PP packing belt in various colors.

(2) According to the proportion of polypropylene used in the production of packing belt:

New pure material PP packing belt, light material, bright color.

New and old mixed pure material PP packing belt, light material, slightly dark color.

Back material sandwich PP packing belt, heavy material, dark color.

(3) According to the packaging tools used:

Fully automatic PP packing belt, the width and thickness of the tolerance requirements are strict, small deviation.

Semi-automatic PP packing belt, the width, thickness tolerance and skewness requirements are low.

Manual packer with PP packing belt, the width, thickness tolerance and deviation requirements are general.

The plastic buckle is matched with thin PP packing belt.

PP flexible fiber belt for steel wire buckle.

(4) Divided into:

Use PP ordinary packing belt to bind cartons.

PP smooth tape for lapping tobacco.

Bundling RMB currency with transparent PP.

PP chemical fiber tape is used for binding chemical fiber package.

PP anti-static tape for electronic products.

Bundling heavy objects with PP heavy belt.

PP flame retardant packing belt for braided coal mine barrier.

As well as other special PP packaging belt for different industries.

5. Color:

White, red, yellow, green, blue, black, colorless and transparent, etc.

6, use

Used for packing cartons or other relatively light objects.

7. Production process:

PP packing belt production process: batching and mixing - plastic particles heating melting - extrusion into water to form a belt embryo - heating stretch molding - embossing - heating and cooling (finalizing treatment) - winding - packaging - storage.

8. Technical parameters of machine belt:

Width tolerance ±0.6mm

Thickness tolerance ±0.05mm

Fracture Tensile (pure material)

9 mm x 0.6 mm or greater 750 n

12 mm x 0.6 mm or greater 1000 n

13.5 mm x 0.6 mm or greater 1125 n

15 mm x 0.6 mm or 1250 n

Elongation at break ≤ 25%

Skewness ≤ 30mm/m

The appearance should be uniform color, neat and clear pattern, no obvious pollution, impurities, no cracking, no damage, perforation and other defects.

9, packaging

Packing with paper coupons, cartons, plastic film (bags) for outer packing, packing should be firm.

10, transportation,

The packing belt should be lightly loaded and unloaded in transportation to prevent sun exposure to the rain forest.

11, storage

The packing belt should be stored in a ventilated, cool and dry warehouse, and should be more than 2 meters away from the heat source. The storage period is one and a half years.

Ningbo Pacific Packaging Taps Co., Ltd. is a specialized packing belt unit, PP packing belt, packing belt manufacturers, understanding or need can call.

(a) cigarette packaging foil

China is the world's largest cigarette production and consumption power, at present our country has 146 large cigarette factories, an annual output of 34 million large amount of cigarette box, basically using cigarette foil packaging, 30% by spraying foil, 70% use rolling aluminum foil, aluminum foil rolling consumption of 35000 tons, with improvements in people's health consciousness and imported cigarettes, smoke foil demand growth slows significantly, it is expected to a slight increase in recent years. China's cigarette packaging foil accounts for 70% of the total amount of double zero foil, at present, there are two or three domestic enterprises can produce high-quality cigarette foil, the technical level is equivalent to the international level, but the overall quality of domestic cigarette foil has a certain gap with the international level.

(two) air conditioning foil

The thickness of air conditioning foil is 0.1mm ~ 0.15mm. With the development of technology, air conditioning foil has a tendency of further thinning. The thickness of leading products in Japan is 0.09mm now. In the very thin state, aluminum foil to have good formability, its structure and performance must be uniform, metallurgical defects less, small anisotropy, and requires high strength, good ductility, uniform thickness, good flatness. The specifications and alloy of air conditioning foil are relatively single, which is suitable for large-scale production. However, the market is seasonal. For professional manufacturers of air conditioning foil, it is difficult for them to solve the contradiction between short supply in peak season and almost no demand in off-season.

Air conditioning foil is a special material for the manufacture of heat exchanger fins for air conditioners. The early air conditioning foil used is a plain foil. In order to improve the surface performance of plain foil, anticorrosive inorganic coating and hydrophilic organic coating were applied before forming to form hydrophilic foil. At present, hydrophilic foil accounts for 50% of the total amount of air conditioning foil, and its use proportion will be further increased. In addition, there is a hydrophobic foil, so that the fin surface has the function of hydrophobic, prevent condensation water adhesion. Because the technology of hydrophobic foils to improve the surface defrost needs further research, the actual production is very few at present.

Drived by the strong market demand, the production capacity and technical level of air conditioning foil in China have been continuously improved in recent years, and now there are large, medium, medium and low size enterprises producing air conditioning foil. The product quality of some large enterprises, such as North China Aluminum and Bohai Aluminum, has basically reached the international advanced level. Due to excess domestic production capacity, the market competition is extremely fierce.

(3) decorative foil

Decorative foil is a decorative material applied in the form of aluminum - plastic composite, which takes advantage of the characteristics of good coloring and high photothermal reflectivity of aluminum foil. Packaging belt manufacturers are mainly used for construction, furniture decoration and part of the gift box packaging. The application of decorative foil in China's construction industry began in the 1990s, spreading rapidly from Shanghai, Beijing, Guangzhou and other central cities to all over the country. In recent years, the demand has increased sharply. It is generally used as decorative materials for the inner wall of buildings and indoor furniture, and is also widely used in the facade and interior decoration of commercial institutions.

Decorative foil has the advantages of heat insulation, moisture-proof, sound insulation, fire protection and easy cleaning, and the appearance of luxury, convenient processing, construction and installation speed. At present, China's construction, home decoration industry has formed a decorative foil application boom. With the rapid development of China's construction industry and the continuous popularity of decorative foil applications, the demand for PP packing belt decorative foil will increase greatly. In addition, the use of decorative foil packaging gifts are very popular abroad.